Temptu S-One Compressor - 110V

Code: 05550

This 110V compressor is 5.5 lbs. and plugs in to any wall outlet. Its size and durability make it ideal for salon or workstation use. The S-One is ideal for artists who airbrush extensively and is recommended for beauty and light to medium body work.
Built-in PSI regulator
Maximum range of PSI of all TEMPTU compressors at 40 PSI
Coil air hose included
Airbrush holder included
EACH (1)

 

How To Use

How To Use

Step 1. Connect one end of the air hose to the air outlet and the other end to your airbrush gun. To ensure air tight seals, it is recommended to use Plumbers Teflon Tape (sold seperately) on all treaded connections. STEP 2: Carefully plug the compressor into a standard wall outlet. STEP 3: Turn the switch on. The compressor will run continuously until you shut it off. STEP 4: When restarting the compressor during operation, always release the air pressure first and turn on again.

Additional Info

Additional Info

Work in a ventilated area. The motor is thermally protected and automatically shuts off when it becomes overheated. If this occurs, turn the compressor off and wait for it to restart until after it cools. Do not use any lubricant, which may damage the air compressor. When you restart the compressor during operation, always release the air pressure first, then turn on.

To top